TSP (Twin Taper-Screw Extrusion Sheet Preforming Machine)

The Kneader Sheet Performer was designed to manufacture rubber sheets on a fully automatic basis. This uniquely designed sheet performer consists of two sections, a twin taper screw feeder and a roller die unit. The feeder section has a large volume hopper, which is capable of handing multiple batches directly from a mixer. The twin taper screws ”bite” and feed the rubber compound into a horizontal roller die for automatic and continuous sheeting, while large volume cooling jackets in the feeder and roller die section imparts effective cooling to the rubber compound.

MODEL TSP-20L TSP-75L TSP-110L TSP-200L TSP-300L
Inverter Extrusion Motor 10HP 30HP 50HP 75HP 100HP
Roller Motor 5HP 20HP 40HP 50HP 75HP
Extruding Capacity/hour 250L 700L 1250L 2000L 3000L
Sheet Forming Width (m/m) 280 450 550 750 950
Sheet Forming Thickness (m/m) 2-5 3-7 3-10 4-15 4-20
Roller Dia & Width ø9"xø9"x450 
m/m
ø12"xø12"x700 
m/m
ø14"xø14"x800 
m/m
ø16"xø16"x1050 
m/m
ø20"xø20"x1200 
m/m
Suitable for any type of Blender 10-20L 75L 110L 150-200L 300L
Thickness Adjusting Motor 3/4HP 1HP 2HP 3HP 3HP
R.P.M 2.0~20 2.0~20 2.0~20 2.0~20 2.0~20
Extruder Roller 1.5~15 1.5~15 1.5~15 1.5~15 1.5~15
Cooling Pump 1/2HP 1HP 2HP 3HP 3HP
Hopper Dimension ø500 ø1000 ø1100 ø1200 ø1500
Control Panel 1 1 1 1 1
Machine Dimension (m/m) 2600X1750X1500 3250X2200X1750 3300X2600X2100 3750X2750X2200 4700X3300X2800



tsp-20l-header.png


tsp-20l-s-2.png




tsp-75l-header.png

tsp-75l-s-2.png



tsp-110l-header.png


tsp-110l-s-2_194115.png           tsp-75l-s-3.png




tsp-200l-header.png

tsp-200l-s-2.png